Instructions

30
On was selected:
2 Use / to set the value for the upper alarm
threshold ( ) and confirm with .
3 Use / to set the value for the lower alarm
threshold ( ) and confirm with .
3
To rregister tthe rradio pprobe:
Radio probes may only be used in countries in which
they have been Type Approved (see application infor-
mation of the radio probe).
The setting function for radio probes is only available if
a radio module (accessory part) is inserted into the
measuring instrument.
º See the chapter COMMISSIONING.
If no radio module is inserted:
º Continue with objective TO SET AUTO OFF.
Each radio probe has a probe ID (RF ID). This consists of
the last 3 digits of the serial no. and the position of the
slide switch in the radio probe (H or L).
 Configuration mode is opened and RF ID and Auto are
lit.
 The radio probe is switched on.
1 Select the desired option with and confirm with
:
· YES: Switches automatic probe detection on
(recommended).
· no: Switches automatic probe detection off.
no was selected:
2 Use / to set the probe ID manually and
confirm with .
5. Operation