testo · Smart Probes Instruction manual
1 Contents 1 Contents 1 Contents ...................................................................................................3 2 Safety and the environment ....................................................................5 2.1. About this document ........................................................................5 2.2. Ensure safety...................................................................................6 2.2.1. 2.2.2. 2.2.3. 2.3. Safety and the testo 510i .................
1 Contents 7 Maintaining the product ....................................................................... 15 7.1. Maintaining Smart Probes ............................................................. 15 7.2. Smart Probes App......................................................................... 15 8 Tips and assistance .............................................................................. 16 8.1. Questions and answers ................................................................ 16 8.2.
2 Safety and the environment 2 Safety and the environment 2.1. About this document Use > Please read this documentation through carefully and familiarize yourself with the product before putting it to use. Pay particular attention to the safety instructions and warning advice in order to prevent injuries and damage to the products. > Keep this document to hand so that you can refer to it when necessary. > Hand this documentation on to any subsequent users of the product.
2 Safety and the environment 2.2. Ensure safety > Do not operate the instrument if there are signs of damage at the housing, mains unit or feed lines. > Do not perform contact measurements on non-insulated, live parts. > Do not store the product together with solvents. Do not use any desiccants. > Carry out only the maintenance and repair work on this instrument that is described in the documentation. Follow the prescribed steps exactly. Use only original spare parts from Testo.
3 Specifications 2.3. Protecting the environment > Dispose of faulty rechargeable batteries/spent batteries in accordance with the valid legal specifications. > At the end of its useful life, send the product to the separate collection for electric and electronic devices (observe local regulations) or return the product to Testo for disposal.
4 Product description 4 Product description 4.1. Overview of Smart Probes 1 2 3 4 5 4.2. Measuring unit LED Key Battery compartment (at the back) Direction of flow testo 405i / testo 410i (not shown) (An arrow on the top of the housing displays the direction of flow in which the measuring instrument has been calibrated and which achieves the best measurement results. Please note the direction of flow during usage.
5 First steps 5 First steps 5.1. Switching on/off testo 549i 5.1.1. Switching on 1. Pull the film out of the battery compartment. 2. Press the button on your Smart Probe. - The Smart Probe switches on. 5.1.2. Switching off 1. Press and hold the button on your Smart Probe. - The Smart Probe switches off. 5.2. Establishing Bluetooth® connection You need a tablet or smartphone with the testo Smart Probes App already installed on it to be able to establish a Bluetooth connection.
5 First steps - 5.3. The LED flashes yellow while connecting via Bluetooth and then flashes green once the connection is established. The connection between the Smart Probe and your mobile terminal device is established. Transmitting readings ✓ The Smart Probe is switched on and connected to your mobile terminal device via Bluetooth. - The current readings are automatically displayed in the App.
6 Using the App 6 Using the App 6.1. Overview of operating controls 1 Choice of applications. 2 3 Display of connected Smart Probes. Switch between the views (list, graphic diagram, table) 4 Measurement settings. (The menu changes depending on the Smart Probe connected and the application selected) 5 Restarts the measuring value recording in graph and table format. 6 Export the readings. 7 Options menu 6.2. App options 6.2.1. Set “Language” 1. 2. 3. - Tap -> Settings -> Language.
6 Using the App 6.2.2. Display Tutorial The Tutorial guides you through the first steps when operating the testo Smart Probes App. 1. Tap -> Tutorial - The Tutorial is displayed. In Tutorial, swipe to display the next page. 2. Tap X to close the Tutorial. 6.2.3. Show help An internet connection is required to display the testo website. 1. Tap -> Help - The page Fehler! Linkreferenz ungültig. is displayed. 6.2.4. Display testo website An internet connection is required to display the testo website. 1.
6 Using the App 6.3.2. Setting favourites 1. Press . - A selection of applications is displayed. 2. Press next to the application that you would like to designate as a favourite. - The asterisk is displayed in orange , and the selected application is listed under Show Favorites. 6.3.3. Displaying information about an application 1. Press . - A selection of applications is displayed. 2. Press . - The information about an application is displayed. 6.4.
6 Using the App 6.6. Settings view 1. Press and select Edit View. - An overview of all Smart Probes and their measurement parameters is displayed. 2. Move the required reading up or down to the position it should be. 3. Press to hide a Smart Probe reading. 4. Press ▼ to select the unit for a reading. 5. Press OK to confirm your settings 6.7. Retaining readings Readings are retained in the “List” view; in the “Trend” and “Table” view, the current readings are still displayed.
7 Maintaining the product 6.8.3. Exporting a graph 1. 2. - Press . A selection of export options appears. Press Export Graph. An image file of the trend display is created. 3. Press . - A selection of sending/export options is displayed. 4. Tap on the sending/export option you need. 7 Maintaining the product 7.1. Maintaining Smart Probes Cleaning the instrument > Do not use any aggressive cleaning agents or solvents! > Mild household cleaning agents or soap suds may be used.
8 Tips and assistance 8 Tips and assistance 8.1. Questions and answers Question Answer LED flashes red • • The instrument switches itself off Remaining battery capacity insufficient > Change the batteries. --- lights up instead of the measurement parameter display • > or • > The App cannot be found in the store 8.2. Batteries are almost spent. Change batteries. Outside the permissible measuring range. Keep within the permissible measuring range.
9 Technical data 9 Technical data 9.1. Bluetooth module The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in each case in countries for which a country certification has been granted. The user and every owner undertake to adhere to these regulations and prerequisites for use, and acknowledge that the re-sale, export, import, etc.
9 Technical data 9.2.2. testo 410i Feature Values Measuring range 0.4 to 30 m/s / 80 to 5,900 fpm -20 to 60 °C / -4 to 140 °F Accuracy ± 1 digit ± (0.2 m/s + 2% of m.v.) (0.4 to 20 m/s) ± (40 fpm + 2% of m.v.) (80 to 4,000 fpm) ± 0.5 °C / ±0.9 °F Resolution 0.1 °C / 0.1 °F 0.
9 Technical data Feature Values Measurement rate 1/sec Available units of measurement °C, °F, m/s, fpm, m³/h, cfm, l/s Storage temperature -20 °C to 60 °C / -4 to 140 °F Operating temperature -20 °C to +50 °C / -4 to 122 °F Battery type 3 micro batteries AAA Battery life 15 hrs Dimensions 200 mm × 30 mm × 41 mm Extendible telescope 400 mm Probe shaft diameter 12 mm Probe tip diameter 9 mm Directives, standards and tests EU guideline: 2014/30/EU 9.2.4.
9 Technical data 9.2.5. testo 805i Feature Values Measuring range -30 °C to 250 °C / -22 to 482 °F Accuracy ± 1 digit ± 1.5 °C or ± 1.5% of m.v. (0 to 250 °C) ± 2.0 °C (-20.0 to -0.1 °C) ± 2.5 °C (-30.0 to -20.1 °C) ± 2.7 °F or ± 1.5% of m.v. (32 to 482 °F) ± 3.6 °F (-4 to 32 °F) ± 4.5 °F (-22 to -4 °F) Resolution 0.1 °C / 0.
9 Technical data Feature Values Accuracy ± 1 digit ±0.8 °C (-20 … 0 °C) / ±1.44 °F (-4 … 32 °F) ±0.5 °C (0 … +60 °C) / ±0.9 °F (32 … 140 °F) ± 3.0 %RH (10%RH…35%RH) ± 2.0 %RH (35%RH…65%RH) ± 3.0 %RH (65%RH…90%RH) ± 5.0 %RH (<10%RH or >90%RH) @ 25°C ±1°C Hysteresis: ± 1.0 %RH Long term stability/year :± 1.0 %RH/year 0.1 °F / 0.1 °C 0.
9 Technical data Feature Values Available units of measurement mbar, hPa, Pa, mmHg, inHg, in WC, psi, mmWC In conjunction with Pitot tube (optional): m/s, fpm, m³/h, cfm, l/s Storage temperature -20 °C to 60 °C / -4 to 140 °F Operating temperature -20 °C to +50 °C / -4 to 122 °F Battery type 3 micro batteries AAA Battery life 150 hrs Dimensions 148 × 36 × 23 mm Directives, standards and tests EU guideline: 2014/30/EU 9.2.8.
10 Certifications 10 Certifications Module Lierda L Series BLE Module Product testo 115i, testo 405i, testo 410i, testo 510i, testo 549i, testo 605i, testo 805i, testo 905i Mat.-No.
10 Certifications China CMII ID: testo 115i CMIIT ID: 2015DP6557 testo 405i CMIIT ID: 2015DP6558 testo 410i CMIIT ID: 2015DP6612 testo 510i CMIIT ID: 2015DP6559 testo 549i CMIIT ID: 2015DP6560 testo 605i CMIIT ID: 2015DP6561 testo 805i CMIIT ID: 2015DP6562 testo 905i CMIIT ID: 2015DP6563 The EU Declaration of Conformity can be found on the testo homepage www.testo.com under the product specific downloads.
10 Certifications Japan testo 115i testo 405i testo 410i testo 510i testo 549i testo 605i testo 905i see Japan Information Korea testo 115i Certification No. MSIP-CRM-Toi-115i testo 405i Certification No. MSIP-CRM-Toi-405i testo 410i Certification No. MSIP-CRM-Toi-410i testo 510i Certification No. MSIP-CRM-Toi-510i testo 549i Certification No. MSIP-CRM-Toi-549i testo 605i Certification No. MSIP-CRM-Toi-605i testo 805i Certification No. MSIP-CRM-Toi-805i testo 905i Certification No.
10 Certifications Taiwan testo 115i NCC: CCAB16LP177FT0 testo 405i NCC: CCAB16LP177AT3 testo 410i NCC: CCAB16LP1770T1 testo 510i NCC: CCAB16LP177DT9 testo 549i NCC: CCAB16LP177ET1 testo 605i NCC: CCAB16LP177BT5 testo 805i NCC: CCAB16LP177CT7 testo 905i NCC: CCAB16LP177GT2 Turkey Authorized USA Product FCC ID: testo 115i FCC ID: 2ACVD-1115 testo 405i FCC ID: 2ACVD-1405 testo 410i FCC ID: 2ACVD-1410 testo 510i FCC ID: 2ACVD-1510 testo 549i FCC ID: 2ACVD-1549 testo 605i FCC ID:
10 Certifications Bluetooth® radio class Class 3 Bluetooth® company ID 10274 IC Warnings This instrument complies with Part 15C of the FCC Rules and Industry Canada RSS-210 (revision 8). Commissioning is subject to the following two conditions: (1) This instrument must not cause any harmful interference and (2) this instrument must be able to cope with interference, even if this has undesirable effects on operation.
10 Certifications Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. KCC Warning 해당 무선 설비는 운용 중 전파혼신 가능성이 있음 Japan Information 当該機器には電波法に基づく、技術基準適合証明等を受けた特定無線設備を装着している。 Module Lierda LSD4BT-S37 Product testo 115i, testo 549i, testo 605i Mat.-No.
10 Certifications Turkey USA Authorized testo 115i: WAF-05602115 testo 549i: WAF-05602549 testo 605i: WAF-05602605 see FCC Warnings Bluetooth® Feature Values Information Bluetooth® range radio type Bluetooth® radio class Bluetooth® company RF Band power output [E.I.R.P] Bluetooth® SIG List Feature Values Declaration ID member company D043363 Testo SE & Co. KGaA Open air: typical 100 m Bluetooth® Low Energy (BLE) 4.2 1 LSD Science & Technology Co., Ltd BT LE: 2402 – 2480MHz BT LE: 16.
10 Certifications Co-location Ce transmetteur ne peut pas être installé en colocation ou être utilisé avec une autre antenne ou transmetteur, quel qu'en soit le type. FCC Warnings Information from the FCC (Federal Communications Commission) For your own safety Shielded cables should be used for a composite interface. This is to ensure continued protection against radio frequency interference.
Testo SE & Co. KGaA Testo-Straße 1, 79853 Lenzkirch Telefon: +49 7653 681-0 Fax: +49 7653 681-100 E-Mail: info@testo.de Internet: www.testo.