User Manual

8. Setting up the instrument 13
8. Setting up the instrument
In the set-up menu the unit, type of probe, and Auto-off -Time
can be changed.
The set-up menu must always be completely run through, also
if the only one parameter has been changed.
 Instrument is switched off.
1 Switching the instrument on:
Press quickly.
- Display test appears.
2 hold pressed down for about 3 sec during Displaytest.
- Configuration mode is opened, after presetting °C or °F is
displayed.
3 Choose °C or °F unit:
press and confirm with .
- After presetting Type K or Type T is shown.
4 Choose probe type Type K or Type T: press and confirm
with
.
- After presetting 10, 30, 60 or off are displayed.
5 Auto-off Time 10, 30, 60 or off choose: press and confirm
with
.
- The configuration is finished. With the new settings, the
instrument changes in measurement mode.
deenfresitptsvnl????