User manual

3 Press / to select the probe that is to be assigned to the chosen
channel no.
4 Assign the radio probe to the chosen channel no. with or exit the
function with , without changing the probe configuration..
Te-Type
The probe characteristic curves stored in the instrument can be set for the
probe type used.
²
Setting pprobe ttype:
 The configuration menu is open, Config. is displayed.
1 Probe ¬¬Te-Type ¬ .
2 Select the desired probe type with / and confirm with .
Adjustment (735-2 only)
The function is only available if probe adjustment data are stored in the
instrument. The PC adjustment software testo 735-2 is required to store probe
adjustment data in the instrument. See documentation on this software.
Probe adjustment data stored in the instrument can be activated/deactivated.
Information on the adjustment data can be displayed.
²
Activating/deactivating aadjustment ddata:
 The configuration menu is open, config. is displayed.
1 Probe ¬¬Adjustm. ¬ .
2 Select On or Off with / and confim with .
3 If On is selected: With / , select the probe socket to which the
adjusted probe is connected, and confirm with .
- The activated adjustment data are displayed for your information.
6.1.5 Language
²
Setting tthe llanguage:
 The configuration menu is open, config. is displayed.
1 Language ¬ .
2 Select the desired language with / and confirm with .
OK
OK
OK
OK
OKOK
OK
OKOK
ESC
OK
6. Setting the instrument44