User Manual

9 Configuration
19
• SMS recipient: addressees who are informed when an alarm occurs. Click
on the checkbox in front of the recipient or enter the name and mobile phone
number of other recipients and click on the + Add button.
• Save
: click on the button to save the settings.
• Delete
: click on the button to delete the alarm setting.
8.3 System warnings
Creating and displaying system warnings
• Click on the + New system warning button to create a new system warning.
Existing system warnings are displayed below the button.
• Click on the title of a system warning to display it.
Configuring and editing a displayed system warning
The following settings can be defined and edited:
• Title: designation of the system warning (required field).
• Battery almost discharged: monitor the WiFi data logger for discharged
battery.
• Power supply interrupted: monitor the external power supply of the WiFi
data logger for interruptions.
• WiFi data logger is not responding: monitor the WiFi data logger for data
transmission failure. Click on the Activate button and configure the
monitoring cycle using the slide control.
Note
The set time should be greater than the WiFi data logger's communication cycle.
• WiFi data logger: measuring point group/measuring point which is to be
monitored. Click on the checkbox in front of the measuring point
group/measuring point.
• E-mail recipient: addressees who are informed when an alarm occurs. Click
on the checkbox in front of the recipient or enter the name and e-mail
address of other recipients and click on the + Add button.
• SMS recipient: addressees who are informed when an alarm occurs. Click
on the checkbox in front of the recipient or enter the name and mobile phone
number of other recipients and click on the + Add button.
• Save
: click on the button to save the settings.
• Delete
: click on the button to delete the system warning.
9 Configuration
9.1 Users
Users can be created and managed.
Standard users
By default, two users are created in the system:
• Account Owner (name can be changed), with Administrator user role (role
cannot be changed).
• Testo Support (name can be changed), with Testo User Support user role
(role cannot be changed).
Creating and editing new users
Other users with different User roles (see page 20) can be created and edited.
• Click on the Add a new user button to create a new user.