User Manual

10 User management
22
9.6 WiFi data loggers
A summary of all WiFi data loggers logged on is displayed.
• Click on the Details button to display more information.
• Click on the Deactivate or Activate button to deactivate or activate WiFi
data loggers.
Configuring a WiFi data logger
• Click on the Configure button to change the configuration.
The following settings can be defined and edited:
• Name of the WiFi data logger: designation of the WiFi data logger
(required field). Condition at delivery: Model_Serial number
• Description: description of the WiFi data logger.
• Select battery type: set the battery type used. For the battery capacity to be
displayed correctly, the correct battery type must be selected.
• Display: switch the display of the WiFi data logger on or off.
• Name of the measuring point: designation of the measuring point (required
field).
• Measuring cycle: interval at which readings are obtained. Set the
measuring cycle using the slide control.
• Day communication cycle and Night communication cycle: interval at
which readings are transmitted to the Testo Cloud. Select the start time for
the day communication cycle and the night communication cycle. Set the
communication cycle using the slide control.
• Channel name: designation of the measurement channel (required field).
Condition at delivery: Model_Serial number_Channel number
• Select unit: unit in which the readings are displayed.
• Select sensor type (only for model T2, T3): sensor type used by the
measurement channel.
• Save
: click on the button to save the settings.
• Deactivate or Activate
: click on the button in order to deactivate or activate
measurement channels or WiFi data loggers.
• Remove
: click on the button in order to log WiFi data loggers off the system.
9.7 Firmware updates
A list with available firmware updates for the WiFi data loggers is displayed.
Firmware updates can be installed on the data loggers via WiFi.
• Click on the Activate button to install a firmware update.
10 User management
The user management provides information and settings options for the user
account.
• Click on the icon to open the User menu.
10.1 User settings
User-specific settings can be made.
• Language: select the language of the user interface.
• Time zone: select the time zone for the date and time display.
• Save
: click on the button to save the settings.
10.2 Account information
Information about your Saveris 2 account is displayed.