User's Manual

2 Safety and waste disposal
4
2 Safety and waste disposal
2.1 Intended purpose
 The testo Saveris Food Logistics Inbound data logger is used to store and
read out series of measurements during the transportation of products that
are subject to cold chain requirements. .
 Configuration is customer-specific and is carried out during production at
Testo. No subsequent modification of the configuration is possible.
 The data logger is designed for single use only. Therefore it must not be
used more than once.
 Data loggers with an expired use-by date must not be used.
 Operation is manual, with no additional auxiliary devices.
 The data logger should be placed as close to the products as possible.
However, the goods must not impair the logger.
 When positioning the data logger, make sure that the surrounding goods do
not press on the button of the data logger.
 This logger requires the associated readout unit (order no. 0572 2802) and
the testo Saveris Food Logistics Inbound software.
2.2 Safety instructions
 Only operate this instrument in the proper manner, for its intended purpose
and within the parameters specified in the technical data.
 Do not operate the instrument if there are signs of damage on the housing.
 Always comply with the locally valid safety regulations when carrying out
measurements. Dangers may also arise from objects to be measured or the
measuring environment.
 Do not store the product together with solvents.
2.3 Warning notices
Always pay attention to any information denoted by the following warnings.
Implement the precautionary measures specified!
Display Explanation
CAUTION
Indicates possible damage to equipment.