User Manual

7 Operating the instrument
7
Display Meaning
Ω, kΩ Resistance in ohms or kilo-ohms
Continuity
,
Rotating magnetic field direction left or right
,
Battery (full / empty)
6 Measuring point illumination, white LED
7 Fork meter for conductor up to 12.9 mm (0.5") in diameter
8 Sensor zone current measurement
9 On the rear: battery compartment and bracket for the probe tips
10 Probe tips, exchangeable (plug-in connection, adhere to polarity: see
printing on probe tips and sockets!)
11 Probe tip cable with sockets for probe tips
6.2. Explanation of icons
Icon Meaning
Attention! Warning about a danger spot, refer to instruction
manual
Caution! Dangerous voltage, risk of electric shock
Continuous double or reinforced insulation in accordance with
category II DIN EN 61140
Suitable for work on live parts
Conformity mark, verifies compliance with the valid EU
Directives: EMC Directive (2014/30/EU) with the EN 61326-1
standard, Low-Voltage Directive (2014/35/EU) with the
EN 61010-1 standard
Fulfils applicable Australian provisions
The instrument complies with the WEEE Directive
(2012/19/EU)
7 Operating the instrument
7.1. Switching the instrument on
> Connect both probe tips or press any button.
- The instrument is switched on, the LC display shows ---.
7.2. Switching measuring point illumination
on/off
> To switch on/off: briefly press the button.