User's Manual

7 Performing the measurement
23
7.2 Setting measuring functions
1 - Open the Measurement submenu.

The submenu with the measurement functions opens:
• Pixel mark:
o Single point measurement: the temperature measuring
point in the centre of the image is marked with white
crosshairs and the value is displayed. In saved images,
the crosshairs can be moved using the joystick in order to
read the value of other measuring points.
o Coldspot, Hotspot: the lowest or highest temperature
measuring point is marked with blue or red crosshairs and
the value is displayed.
• Min/Max on Area:
o Min/max on area: the minimum, maximum and mean
values for a selected area are displayed.
o Coldspot, Hotspot: the lowest or highest temperature
measuring point within the range selection is marked with
blue or red crosshairs and the value is displayed.
• Measuring range: choose between two temperature ranges.
• Differential temperature: identifies the difference between two
temperatures.
• External measurement values: select Humidity, Current,
Voltage, Solar, Power, None.
• IFOV: the IFOV warner shows what can be measured
accurately from a specific distance.
• Zoom: enlarges the image section (2x, 3x, 4x)
2 - Move the joystick up/down to select the required function and
then press OK.