User's Manual

7 Performing the measurement
32
4 - Affix ε-marker to the object and measure with the camera.

RTC and emissivity are set automatically.
5 - Press OK.
If it is not physically possible to determine the emissivity due to the
same object temperature and reflected temperature, the input field
opens again. The emission value must be input manually.
7.7 Selecting the colour palette
This function is only available if the Image type is set to infrared image.
1 - Select the Palette function.
2 - Move the joystick up/down to select the required colour palette and
then press OK.
7.8 Activating/disabling the zoom
1 - Move the joystick to the right and open the softkey menu (quick
select button).
2 - Move the joystick down and select Zoom. Then press OK.
3 - Press to set the Zoom.
7.9 Activating/disabling the laser
1 - Move the joystick to the right and open the softkey menu (quick
select button).
2 - Move the joystick up or down and select Laser. Then press OK.
3 - Press to activate the Laser.