MSDS

Date Printed: 4/14/2015
7. Handling and Storage
HANDLING: Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse.
Use only with adequate ventilation. Follow all MSDS/label precautions even after container is emptied because it may retain product
residues. Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin and clothing.
STORAGE: Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Contents under
pressure. Do not store above 120 ° F. Store large quantities in buildings designed and protected for storage of NFPA Class I
flammable liquids. Product should be stored in tightly sealed containers and protected from heat, moisture, and foreign materials.
Store in a dry, well ventilated place. Keep container tightly closed when not in use. Keep away from heat, sparks, flame and sources
of ignition. Avoid excess heat.
8. Exposure Controls/Personal Protection
Chemical Name CAS-No.
Weight %
Less Than
ACGIH TLV-
TWA
ACGIH TLV-
STEL
OSHA PEL-TWA
OSHA PEL-
CEILING
Propane 74-98-6 25.0 1000 ppm N.E. 1000 ppm N.E.
n-Butane 106-97-8 15.0 1000 ppm 1000 ppm N.E. N.E.
Toluene 108-88-3 10.0 20 ppm N.E. 200 ppm 300 ppm
Ethyl Acetate 141-78-6 10.0 400 ppm N.E. 400 ppm N.E.
Ethanol 64-17-5 10.0 N.E. 1000 ppm 1000 ppm N.E.
Propylene Glycol Monobutyl
Ether
5131-66-8 10.0 N.E. N.E. N.E. N.E.
Methyl Ethyl Ketone 78-93-3 10.0 200 ppm 300 ppm 200 ppm N.E.
Xylene (mixed isomers) 1330-20-7 5.0 100 ppm 150 ppm 100 ppm N.E.
Acetone 67-64-1 5.0 500 ppm 750 ppm 1000 ppm N.E.
Stoddard Solvent 8052-41-3 5.0 100 ppm N.E. 500 ppm N.E.
1-Methoxy-2-propyl acetate 108-65-6 5.0
50 ppm (AIHA
WEEL)
N.E. N.E. N.E.
Aluminum Flake 7429-90-5 5.0 1 mg/m3 N.E.
15 mg/m3 [Total
Dust]
N.E.
Iron Oxide 1309-37-1 5.0
5 mg/m3
(Respirable
Dust, OSHA)
N.E.
15 mg/m3 (Total
Dust)
N.E.
Ethylbenzene 100-41-4 1.0 20 ppm 125 ppm 100 ppm N.E.
Carbon Black 1333-86-4 1.0
3 mg/m3
(Inhalable Dust)
N.E. 3.5 mg/m3 N.E.
PERSONAL PROTECTION
ENGINEERING CONTROLS: Use explosion-proof ventilation equipment. Provide general dilution of local exhaust ventilation in
volume and pattern to keep TLV of hazardous ingredients below acceptable limits. Prevent build-up of vapors by opening all doors
and windows to achieve cross-ventilation. Use process enclosures, local exhaust ventilation, or other engineering controls to control
airborne levels below recommended exposure limits.
RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be
followed whenever workplace conditions warrant a respirator's use. A NIOSH/MSHA approved air purifying respirator with organic
vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed
exposure limits.
SKIN PROTECTION: Use gloves to prevent prolonged skin contact. Nitrile or Neoprene gloves may afford adequate skin protection.
EYE PROTECTION: Use safety eyewear designed to protect against splash of liquids.
OTHER PROTECTIVE EQUIPMENT: Refer to safety supervisor or industrial hygienist for further guidance regarding types of
personal protective equipment and their applications.
HYGIENIC PRACTICES: Wash thoroughly with soap and water before eating, drinking or smoking. Remove contaminated clothing
immediately and launder before reuse.
Page 4 / 8