Technical Specifications

TECHNICAL DATA
TES-40
TESTORS
®
CRAFT
DISTRESSED IVORY KIT
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 800∙837∙8677
www.rustoleum.com/testors
Form: ARJ-2079
Rev.: 060120
PHYSICAL PROPERTIES
IVORY BASE COAT
ANTIQUE TOP COAT
Resin Type
Water-based Acrylic
Water-based Acrylic
Pigment Type
Titanium Dioxide, Iron Oxides
Iron Oxides, Carbon Black
Solvents
Water, Propylene Glycol, Texanol
Water, Glycol ethers, Propylene glycol
Weight
Per Gallon
12.4 lbs.
8.7 lbs.
Per Liter
1.48 kg
1.04 kg
Solids
By Weight
61.3%
21.4%
By Volume
42.6%
18.4%
Volatile Organic Compounds
<250 g/l 2.08 lbs./gal.
<150 g/l 1.25 lbs./gal.
Recommended Dry Film Thickness
(DFT) per Coat
1.5-2.5 mils
(37.5-62.5µ)
1.5-2.5 mils
(37.5-62.5µ)
Wet Film to Achieve DFT
(Unthinned material)
3.5-6.0 mils
(87.5-150µ)
8.0-13.5 mils
(200-337.5µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
1 Kit covers 60-85 square feet
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
15 minutes
Recoat
2-4 hours
NA
Fully Dry
NA
24 hours
Shelf Life
5 years
5 years
Flash Point
>200ºF (93ºC)
>200ºF (93ºC)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.