Operation Manual

12 • Cinebar

21 Mk2

Adjusting bass and high-range tones

In addition to the sound effects, you can also in-

crease or decrease the bass and high-range tones

individually.

1. Push the button Tone (20) several times if necessary.

You will either see the setting for the bass tones (e.g.

BASS +2) or for the high-range tones (e.g. TREB -1) on

the display.

2. With the buttons + / – (19), adjust the respective

setting to your taste.

Adjusting the subwoofer volume

• Adjust the subwoofer volume with the buttons Sub

+/– (1 5 ) .

Display brightness

• Push the button Dimmer (17) several times if necessary

in order to set one of the display’s 3 brightness levels.

Lip Sync

During playback of movies, the picture and sound are

not synchronous sometimes. You can eliminate this

bothersome effect with your Cinebar

21 Mk2.

• Push the button Lip Sync (18) and then adjust the

delay between the picture and sound using the

buttons +/– (1 9). Values can be adjusted between

0 and 200 ms.

Energy-saving function

• If the Cinebar

21 Mk2 does not receive a signal

for more than 20 minutes, it will automatically

switch to standby. Then it consumes less than 0.5

watts.