Specifications

}
Q W E
R T Y
U
O
P
I
{
}
e r
q w
t
11
· Cinebar 51 THX
CB 51 RC remote control
Q
Standby
Switches the appliance on and off.
W
USB
Press this button to select playback from USB
storage media. MP3 and WMA le formats are
supported.
E
Mute
Switches sound playback on and off. The display
shows the active mute function.
R
AUX 1/2
Press this button to select audio inputs Aux 1
and Aux 2 as sound sources. Pressing the button
repeatedly switches between the two inputs.
T
Optical
Press this button to select the optical digital
audio input as a sound source.
Y
Coaxial
Press this button to select the coaxial digital
audio input as a sound source.
U I
VOL+/-
These two buttons are used to control the
volume.
O
Prev
During USB playback, use this button to jump
back to the start of the track. Pressing it again
will take you back to the start of the previous
track.
P
Next
Use this button to jump to the start of the next
track during USB playback.
{
Play/Pause
Use this button to start playback of a connected
USB medium or to pause playback.
}
Sub +/-
These two buttons are for controlling the volume
of the subwoofer channel.
q
Mode*
Switch between the various stereo operating
modes by pressing this button repeatedly. The
modes are available either with or without
Goundary Gain Compensation, See „BGC“ for
reference.
w
Repeat
During USB playback, use this button to repeat
one or all tracks or to switch off the repeat
function.
e
Tone
Press this button to control the bass and treble
sound during music playback. Pressing this but-
ton repeatedly switches between the bass and
treble menu options.
r
EQ
Switch between the various EQ presets by pres-
sing this button repeatedly.
t
BGC
By using the „BGC“ button the the „Boundary
Gain Compensation“ is switched on or off. It is a
global setting for the „Mode“ menu to have the
„BGC“ activated or deactivated.
Range of functions of the CB 51 RC remote control
Always point the remote control towards the re-
ceiver on the Cinebar 51.
The Cinebar 51 THX System is primarily operated
using the CB 51 RC remote control supplied. You
can clearly see the status of the selected func-
tions on the appliance display, even from a di-
stance.
Note
Under some circumstances, the
remote operability of the Cinebar
51 THX System may be impaired.
Possible causes for this are
direct sunlight, strong sources of
articial light or infrared lights.
*Tip
If the system is placed on a shelf
or on the wall, press the “Mode”
button and choose the mode:
“BGC” (Boundary Gain Compen-
sation). This mode ensures clean
sound in basic and deep tones.
Around 7m
Fernbedienung
+/-30°