Specifications

· Cinebar 51 THX

Volume control · Mode setting

Note

There may be a slight pause in

playback when changing the

operating mode (Mode) and

sound settings (EQ).

Sound settings

Pressing the sound button branches the sound

control. By pressing the button once you can ac-

cess the bass control, whose working area can be

controlled by +/- 6 dB using the “+/-” buttons. By

pressing the button again you can access the tre-

ble control of the treble component. You can also

adjust the value up to +/- 6dB using the “+/-” but-

tons. The display shows the value that has been set.

EQ set-up

Pressing the EQ button repeatedly switches bet-

ween the sound presets “Flat”, “Rock”, “Pop”, “Clas-

sic” and “Jazz”. The selected mode is shown on the

screen.

Mode setting

Press the mode button during playback to select

the required stereo mode. Pressing the button

repeatedly will switch between “BGC”, “Reference”,

“Stereo” and “Wide” modes (presets). The selected

mode will be shown on the display. Choose “BGC”

for a clean sound in basic and deep tones (when

the placement of the system is on the wall or on

shelves). Select “Stereo” for conventional two-

channel playback. “Reference” and “Wide” are al-

ternative operating modes with virtual surround

playback.

Tone

Mode