Specifications

14
· Cinebar 51 THX
USB playback · Repeat function
Playback from USB storage media
You can select a USB medium as a sound source
by pressing the USB button. USB sticks with a ca-
pacity of up to 8 GB. The storage device must be
formatted in FAT 16/32 format. MP3 and WM3 les
can be read, but not WAV format. Subfolders on
the USB device are also recognised. The tracks are
played or selected according to the le hierarchy,
and in alphabetical order within a level of the le
structure. Depending on the USB device and the
quantity of MP3/WMA les it contains, the reading
process may take a while. The reading process is in-
dicated on the display with the message “Loading”.
Start playback by pressing the play button, which
also functions as a pause button. The display
shows the track number currently selected and
the play time. The display also shows a small sym-
bol for the playback and pause functions as well
as an MP3 symbol.
Repeat function
Press the repeat button to switch the repeat
function on or off. You can choose between no
repeats, repeating the current track or repea-
ting all tracks. The display shows you the selected
mode:
Ě Re Off No repeats
Ě Re 1 The current track will be repeated.
Ě Re All All tracks will be repeated
Note
When you insert a USB device
into the selected USB port, the
“Loading” message will be shown
in the display. The rst track will
then start to play automatically.
The same applies if you switch on
the Cinebar 51 THX System with
a USB device inserted and if the
USB port was the last selected
source.
Track selection
Use the “Prev” and “Next” buttons to select
tracks.
Press the “Next” button to skip to the beginning
of the next track.
Press “Prev” to select the beginning of the cur-
rent track and press it again to jump back to the
beginning of the previous track.
Ě
||
ĚĚ
|
ĚĚ
|
USB