Specifications

15
· Cinebar 51 THX
If a problem should occur, please check through
the following advice before contacting our ser-
vice staff.
No power
Ě Please check whether the plug is properly
inserted in the mains socket.
Ě Check whether the corresponding electric
circuit is live.
No sound or poor sound output
Ě You may have inserted an incompatible disc.
To test this, insert an audio CD into your playback
appliance and use the remote control to select
the correct input.
Ě Check whether the television and Cinebar 51 THX
are switched on and ensure the correct
programme source is selected.
Ě Check the cable connection between the TV,
player and Cinebar 51 THX.
Ě Check whether the mute function has been
activated.
Ě Check whether the subwoofer is switched on.
Ě The USB device is not recognised or does not
contain any readable data. First try to play
other tracks or another medium.
Ě Condensation may have formed in the appliance.
Remove the USB device and leave the appliance
switched on for one to two hours.
Malfunctions
Ě If the Cinebar 51 THX System malfunctions,
disconnect the device from the power supply
for at least 30 minutes. Then connect the
Cinebar 51 unit again. The internal restore
function should reset the appliance.
No surround sound playback
Ě The transfer of surround-encoded data requires
a digital connection to the Cinebar 51 Unit.
Ě Check whether the operating mode has been
set to “Reference” or “Wide” (mode button).
Ě Not every DVD has surround sound. Try inserting
another DVD to test this.
The remote control does not work
Ě First check whether the batteries are still
charged and if necessary replace them.
Ě Point the remote control at the sensor on the
Cinebar 51 Unit.
Ě Make sure that there are no obstacles between
the remote control and Cinebar 51 Unit. Remove
these, if necessary.
Ě Check whether the batteries in the remote
control have been inserted with the correct
polarity.
Ě Check whether the batteries have leaked.
Ě Check whether there are uorescent lamps
close by.
The appliance does not react to input com-
mands
Switch the appliance to standby and switch it on
again. If this doesn’t help, switch the system off
completely and then on again. To do this, switch
the Cinebar 51 Unit to standby. Now switch the
subwoofer off and disconnect the power supply
to the Cinebar 51 Unit. Follow this procedure in
reverse to switch the system on again.
The USB stick is not recognised
Due to the wide variety of USB sticks on the mar-
ket, it is not possible to guarantee 100% compa-
tibility with all sticks. We have had the best test
results with the latest USB memory sticks (using
the USB 2 standard).
No MP3 playback/noisy MP3 playback
Ě If data les and MP3 les are mixed together
on the same data storage device, playback
may be noisy or even blocked altogether.
Ě Check to see whether all of the les on the
storage medium are MP3 les. If necessary
skip les and try to play other MP3s.
Troubleshooting