Specifications
8
· Cinebar 51 THX
Q
Standby
Switches the appliance on and off.
When you switch off the appliance, the Standby
message appears for a short while in the appliance
display.
W
Source
Switches through the available inputs, one after
the other. Aux 1, Aux 2, Optical, Coaxial and USB.
When the appliance has been switched on, the
last signal source selected will automatically be
selected again.
E
USB port
Supports storage media with a USB 1.1/2.0 in-
terface. USB sticks with up to 8 GB capacity are
supported.
R
Display
The display is used as a clear text display for the se-
lected sound source and the activated operations.
In USB player mode, the display shows the current
track number and the playing time.
In this mode, the display also shows small symbols
for recognised MP3 les and Play and Pause modes.
T
Volume -/+
Use these buttons to control the amplier volume.
The control range is from 0 to 40 (maximum volu-
me).
Y
LED power light
Indicates that a power supply is present.
This LED lights up red in standby mode. During
normal operation, the LED doesn’t light up. Instead
the last active signal source is shown on the display
and selected when the device is switched on.
Cinebar 51 THX front
Q
W
E
T
R Y