Specifications

O
I
Y
U
T
9
· Cinebar 51 THX
Cinebar 51 THX back · CD 51 SW connection
Please note
The Cinebar 51 THX System
independently recognises
whether the subwoofer output
is being used. If the jack is being
used, the sound will be adjusted
accordingly. If you are using the
CB 51 SW, this should always
also be switched on.
Note
If you want more powerful bass
effects, you can connect a larger
or second active subwoofer to
the subwoofer output.
Cinebar 51 Unit back
Q
Power supply
Connect the appropriate power supply cable to
supply the Cinebar 51 Unit with power.
W
Analogue audio inputs
Use the Aux 1 and Aux 2 stereo inputs to connect
analogue signal sources. Use normal cinch cables
for the connection.
E
Digital audio inputs
You can connect compatible digital audio appli-
ances here. You can use either a coaxial or an
optical cable connection. You can also feed in en-
coded, multichannel surround data using these
inputs.
R
Subwoofer output
Connect the CB 51 SW subwoofer to the Cinebar
51 THX System here.
The cut-off frequency is set at 150 Hz.
Connection to the CB 51 SW subwoofer
The subwoofer is directly connected to the Cine-
bar 51 Unit using the cinch cable supplied. If the
cable isn’t long enough you can use a longer, pre-
ferably high-quality cinch cable.
CB 51 SW back
T
Cinebar In
Connect this jack to the subwoofer output of the
Cinebar 51 unit.
Y
Auto
This switch activates the automatic switch-on
function of the CB 51 SW. If there is an audio si-
gnal at the input, the subwoofer will switch on. If
there is no signal for a few minutes, the CB 51 SW
will switch to standby mode.
U
Volume
You can adjust the global output volume of the sub-
woofer using the level control. Please read the “Sub-
woofer volume” section on page 12.
I
Power
This rocker switch is used to switch the CB 51 SW
on and off.
O
Power supply
Connect the appropriate power supply cable to
supply the CB 51 SW with power.
Explanation of symbols
The arrow-headed lightning
symbol in an equilateral triangle
indicates the presence of a
dangerous non-insulated elec-
trical voltage within the system
housing and therefore a risk of
electrical shock.
The exclamation mark in an
equilateral triangle, as afxed
to the appliance, is to make
the user aware of important
operating and maintenance
instructions.
This product complies with
European Community guidelines
2004/108/EC and 2006/95/EC
The dustbin symbol printed
on our products’ type plates
and ampliers states that
Lautsprecher Teufel guarantees
proper disposal of these speakers
and subwoofers in line with the
Electrical and Electronic
Appliance Act.
This product is a safety class II
product in accordance with DIN
standard EN 61140 (VDE 0140-1)
and IEC 60417 and does not re-
quire a safety plug, only the plug
supplied (2-pole). The casing has
reinforced or double insulation
against electric shock.
Attention
The separating equipment of
this equipment is the mains
plug, this separating equipment
must be usable without
difculties.
O
I
Y
U
T
Audiokabel
W E R
Audio cable
Q