Technical description and operating instructions Cinebar 52 THX 2.
Contents General notes and information.................................. 2 Notice......................................................................2 Trademarks ............................................................2 Original packaging..................................................3 Complaints..............................................................3 Contact....................................................................3 Proper use.......................................................
You can view the DTS patents at http://patents.dls.com. Manufactured under license from DTS Licensing Limited. DTS, the symbol as well as DTS and the symbol collectively are registered trademarks. DTS Digital Surround is a trademark of DTS, lnc. © DTS, lnc. All rights reserved. Contact The HDMI and High-Definition Multimedia Interface symbols as well as the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the USA and other countries.
For your safety Signal terms You can find the following signal terms in these instructions: WARNING This signal term indicates a moderate risk, which, if not avoided, may result in death or severe injury. CAUTION This signal term indicates a low risk, which, if not avoided, may result in minor or moderate injury. NOTE This signal term warns you of potential damage. Safety notes WARNING Improper electrical installation or excessive mains voltage may result in an electrical shock.
Extended listening at high volumes may lead to hearing loss. • To avoid damage to health, avoid extended listening at high volumes. • When the volume is set high, always keep a certain distance from the device and never place your ear directly on the speaker. • If a speaker is set to full volume, this may produce very high sound pressure. This may have psychological consequences and also cause physical injury. Children and pets are particularly at risk.
Explanation of symbols Safety class II Dual insulation Risk of electrical shock – do not open the housing. Disconnect power cord before changing fuse. 2 AL / 250 V fuse Old devices must not be disposed of with household waste! If the device is no longer operational, every consumer is required by law to dispose of old devices separately from household waste, e.g. at a collection point run by the communal authority/borough.
Overview Unpacking • Carefully open the box, take out the EPE foam halfshell and carefully lift the speaker out of the box.
Control elements and connections Soundbar CB 52 SB 1 Item Name 4 5 Description 1 Turn the device on/off 2 Select the source (HDMI ARC, HDMI 1–4, OPTICAL 1–2, COAXIAL 1–2, AUX 1–2) 3 4 5 Standby LED Display Increase (+) / decrease (–) the volume –/+ 6 Item 6 7 8 8 2 3 Name 7 8 Description Keyhole opening for wall mounting Connector jack for power cord Connector jacks (see the next page for details) • Cinebar 52 THX 6
Connector jacks 9 10 11 14 Item 9 10 11 12 13 14 Name SUBWOOFER OUT DIGITAL IN ANALOG IN SERVICE HDMI OUT HDMI IN 13 12 Description Output jack to the subwoofer Digital input jacks (2x coaxial, 2x optical) Analogue input jacks (1x 3.
Subwoofer CB 52 SW 25 26 27 28 29 30 31 Item 25 26 27 28 29 30 31 10 Name CINEBAR IN AUTO • ON VOLUME POWER Description RCA input jack from CB 52 SB, SUBWOOFER OUT jack (9) Subwoofer permanently switched on (ON) or only when activated by the Cinebar 52 THX (AUTO) Power LED (red = standby, green = operation) Set the subwoofer volume Mains switch for the subwoofer IEC input jack for mains cord f Mains fuse • Cinebar 52 THX
Setup/wall mounting Setup location Cinebar 52 THX The space under the TV set is an ideal location. Hang the Cinebar 52 THX either directly on the wall or use the stand b to set it up under the television. Subwoofer CB 52 SW You should also place the subwoofer on the floor as close as possible to the television. However, you can also set it up at another location in the room as the human ear is unable to localise low tones.
Connection example Subwoofer CB 52 SW Teufel BT Link HDMI DIGITAL AUDIO OUT AUDIO OUT Video game console CD player AUDIO OUT OPTICAL CB 52 SB MP3 player optional audio connection *) HDMI OUT DIGITAL AUDIO OUT COAXIAL AUDIO OUT Sat receiver Blu-ray player This connection example only shows a few connection options. Often you can choose between several con- 12 • Cinebar 52 THX AUDIO OUT COAX HDMI TV set nection variants for a device.
Once you have connected all devices, you must also use the enclosed mains cord to connect the Cinebar 52 THX and the subwoofer with the power supply. Make sure that the sockets are easily accessible. Devices connected to HDMI 1 – 4 do not have to be additionally connected to the television set. The video signal from these devices is looped through and forwarded to the television set via HDMI TV.
Remote control Removing insulation strips An insulation strip has been applied between the battery and the contact. It ensures that the battery still has a full charge upon delivery. Simply pull off this strip. Changing the battery You should change the battery if the remote control stops working properly or after 2 years at the latest. Battery type: CR 2025 lithium battery. To change the battery remove the battery compartment cover from the remote control and change the batteries.
Use Cinebar 52 THX Shortly after the last button is pressed, the original readout will appear again on the display. The new settings have now been saved. 24 23 15 16 17 1 2 3 4 5 22 18 21 19 20 Activating and deactivating • Turn the Cinebar 52 THX on or to standby with the buttons (1)/(24). When in standby, the standby LED (3) will illuminate in red. Selecting a source Also see “Table 1” on page 13.
Subwoofer CB 52 SW Turning the subwoofer on and off • You can turn the subwoofer on and off with the mains switch (29). Once it has been activated, the power LED (27) will turn green. The subwoofer is in the power mode. 26 Setting the subwoofer • AUTO• ON switch (26) –– Switch position AUTO: The subwoofer switches to standby if it doesn't receive a signal for approx. 20 minutes. Then the power LED (27) will illuminate in red.
Troubleshooting The following advice should help you to solve problems. If this does not help, you will find useful information in the detailed FAQs on our website. Otherwise, please contact our hotline (see page 3). Take note of the warranty instructions. Problem The device doesn't emit any sound. The sound is not ideal. The subwoofer isn’t working. Possible cause The wrong source has been selected. The device is set to “mute”. The volume is set to “0”. The settings are incorrect.
Technical data Subwoofer CB 52 SW Cinebar 52 THX Dimensions (WxHxD) 305 x 420 x 470 mm 1001 x 130 x 120 mm Weight 17,7 kg 8,3 kg Operating voltage 230 V~/50 Hz 230 V~/50 Hz Max. power consumption 400 watts 200 watts You can find further technical data on our website. Technical changes reserved! This product conforms with Council of the European Union guidelines 2004/108/EC and 2006/95/EC.
For questions, suggestions or other issues please contact our customer service department: Lautsprecher Teufel GmbH Tel.: 00800 200 300 40 (toll-free) Gewerbehof Buelowbogen - Aufgang D1 Fax: +49 (0)30 - 300 930 930 10783 Berlin (Germany), Buelowstr. 66 www.teufelaudio.com No liability is accepted for the accuracy of this information. Technical changes, typographical errors and other errors reserved. Instruction No.