Operating instructions

On
Off
Power
E
Start-up
Switch the rear mains switch E to »On« to acti-
vate the 5.1 amplier.
The ring encircling the round »Standby« button
on the front of the woofer lights up »red«.
Press the »Standby« button to switch on the de-
vice fully – the rings encircling each of the three
control elements turn »blue« indicating the sub-
woofer is now ready for use.
Bass volume
The Concept E subwoofer has a separate button
for quickly and easily controlling the bass tones
of the overall sound. *
Volume
Turn the »Volume« dial to control the overall vol-
ume of the 5.1 amplier.
Please note that each of the upstream source
devices, i.e. the sound card or DVD player, or the
intermediary connection boxes like the decoder
station itself, has its own volume control. You will
have to nd a balance between these devices and
the Concept E system, which is an easy thing to do.
Ě Set the subwoofer to »on« or »yes« on the
speaker set-up menu.
Ě The optimum cut-off frequency is
150Hz –120Hz or 200Hz is also possible.
Decoderstation settings
Please observe the detailed description in the
Teufel Decoderstation manual or consult the sup-
port section on our website: www.teufelaudio.
com.
14
· Concept E
Please note
If you are going to be away or
if the 5.1 amplier is not going
to be used for a long period of
time turn the mains switch E
to »Off«.
* The same applies here: each of
the upstream source devices, i.e.
the sound card or DVD player,
or the intermediary connection
boxes like the decoder station
itself, has its own bass control. It
is possible to nd an individual
balance between these devices.
Feel free to experiment and nd
the conguration that works
best for you.
Start-up
Volume
Min · · Max
Bass
Min · · Max
Standby
Volume
Min · · Max
Bass
Min · · Max
Standby
Bass
Min · · Max
Standby Volume
Min · · Max
Bass
Min · · Max
Standby
Volume
Min · · Max
Set-up: DVD player · Decoderstation
Adjustment to the DVD player
with 5.1 analogue output
The Concept E 100/200/300/400 set has no
integrated decoder functions. Therefore it is
»dependent« on the allocation of the external
decoders when splitting the signals. This de-
coder is a component of the DVD player soft-
ware. Its set-up options differ greatly from
device to device. Please consult the handbook
for your DVD player.
The following basic settings should always be
made:
Ě Our front/centre/rear speakers should be
dened in the speaker set-up menu (speaker
management/bass management) of the DVD
player as »small« or »normal« - not »large«!