Operation Manual

Note
If you are using a 7.1 sound card,
the outputs for the centre rear
channels are not used.
Example connection of a
5.1 sound card
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
11
Concept E ·
LINE OUT
SUBWOOFER
CENTRE
IN
L
FRONT
REAR CENTRE
R
SUB
LINE OUT
REAR L/R
IN
L
FRONT
REAR CENTRE
R
SUB
LINE OUT
FRONT L/R
IN
L
FRONT
REAR CENTRE
R
SUB
Connecting to a 5.1 sound card
The Concept E 100/200/300/400 systems are per-
fect for using with any computer. If your sound card
is set up for 5.1 operation, it will usually have three
3.5mm mini-jack outputs. Connect these to the in-
puts using three cables (3.5 mm stereo mini-jacks
to 2 x cinch) for the front R/L, rear R/L, centre and
subwoofer positioned on the back of the Concept
E subwoofer. The colours of the outputs and the
types of signals transferred at each output differ
from sound card to sound card.
Please refer to the sound card manual. The Teufel
system then reproduces the surround signal de-
coded by the sound card.
Connection: 5.1 sound card
5.1 SOUND CARD SUBWOOFER CONCEPT E