Operation Manual

3IEC cables
3Satellite speaker
CE 10 FCR
5 Subwoofer
CE 400 SW/CE 300 SW/CE 200 SW/CE 100 SW
3Satellite speaker
CE 20 FCR
6
 · Concept E
Unpacking • Contents• Assembly
First please check that all
system components are
included.
Please note
Please keep the boxes for the
eight-week return period at
least, as we can ONLY repay
the full purchase price if the
products are returned in the
ORIGINAL PACKAGING in which
they were supplied!
Unpacking
Fold back the flaps on the top of the box, remove
the polystyrene packaging and carefully lift each
loudspeaker out of the box.
All Concept E sets are supplied as a complete sys-
tem.
Contents of Concept E 100/200
Ě 1 x subwoofer with integrated 5.1 amplifier
Ě 5 x identical satellite speakers
Ě 5 x table bases for satellite speakers
Ě Screws, for mounting speakers
Ě 25 rubber feet for the satellites
Ě1 x IEC cable for power supply
Ě U-shaped profile for attaching the satellites
to the optional M 50 P bases
Contents of Concept E 300/400
Ě 1 x subwoofer with integrated 5.1 amplifier
Ě 5 x identical satellite speakers
Ě 1 x cover for diagonal mounting of centre
Ě 5 x table bases for satellite speakers
Ě 1 x base for diagonal mounting of centre
Ě Screws, for mounting speakers
Ě 30 rubber feet for the satellites
Ě 1 x IEC cable for power supply
Ě U-shaped profile for attaching the satellites to
the optional M 50 P bases
Mounting the bases
If required, use the screws supplied to attach
the satellite speakers CE 10 FCR or CE 20 FCR to
the bases provided, as shown in the diagram. For
acoustic reasons we do not recommend placing
the satellites straight onto the table. We also rec-
ommend that you stick the rubber pads supplied
to the points on the table bases provided for this
purpose, to ensure a safe and secure position and
to protect the top of the table as well as possi-
ble.
Use the u-shaped profiles supplied if you are us-
ing an optional M 50 P base to mount the system.