Specifications

On
Power
E
Start-up
Switch the rear mains switch E to »On« to acti-
vate the 5.1 amplifier.
The ring encircling the round »Standby« button
on the front of the woofer lights up »red«.
Press the »Standby« button to switch on the de-
vice fully – the rings encircling each of the three
control elements turn »blue« indicating the sub-
woofer is now ready for use.
The 5.1. amplifier switches automatically to stand-
by mode if it does not receive an audio signal for
approximately 20 minutes.
Bass volume
The Concept E subwoofer has a separate button
for quickly and easily controlling the bass tones
of the overall sound.
The same applies here: each of the upstream
source devices, i.e. the sound card or DVD player,
or the intermediary connection boxes like the
decoder station itself, has its own bass control. It
is possible to find an individual balance between
these devices. Feel free to experiment and find
the configuration that works best for you.
Volume
Turn the »Volume« dial to control the overall vol-
ume of the 5.1 amplifier.
Please note that each of the upstream source
devices, i.e. the sound card or DVD player, or the
intermediary connection boxes like the decoder
station itself, has its own volume control. You will
have to find a balance between these devices and
the Concept E system, which is an easy thing to do.
17
Concept E ·
Please note
If you are going to be away or
if the 5.1 amplier is not going
to be used for a long period of
time turn the mains switch E
to »Off«.
Start-up
Volume
Min · · Max
Bass
Min · · Max
Standby
Volume
Min · · Max
Bass
Min · · Max
Standby
Bass
Min · · Max
Standby Volume
Min · · Max
Bass
Min · · Max
Standby Volume
Min · · Max
Volume
Min · · Max
Bass
Min · · Max
Standby