Operation Manual
• DecoderStation 7 13
8
2 3 4
Menu functions
You can control the functions and setup of Decoder-
Station 7 via the main menu. To use the menu:
• Push the control dial 3 “POWER/SELECT” or the button
37 “•”. The main menu will appear on the connected
screen and in the display panel 2.
• Select the desired sub-menu with the control dial 3
“POWER/SELECT” or the button 27 “
▲/▼
” and push
the control dial 3 or the button 37 “•”.
• The sub-menu will open and you can select the next
sub-menu or change the values with the control dial 3
or button 27 “
▲/▼
”.
• You accept the setting by briefly pushing the control
dial 3 or the button 37 “•”.
• You terminate the respective function with the button 4
“BACK” or 28 “RETURN” or abort it and return to the
previous menu.
If the menu appears in German, you can change the
on-screen menu language to English (the unit display 2
always displays English text):
1. Select the item “System Setup”.
2. Select the item “D/E”.
3. Select the item “English”.
The onscreen menu will now switch to English.
4. Push the “RETURN” button 28 until only the main menu
is visible.
“Tuner” menu
This menu is only available in radio mode (FM/AM).
Station memory (Preset)
You can switch the station memory with the control dial 3
or the arrow buttons 27 “
▲/▼
”.
Frequency
You can adjust the tuning frequency with the arrow but-
tons 27 “
▲/▼
”:
• Manually: Every time the button is tipped, the fre-
quency is increased or decreased by one increment
(FM: 0.05 MHz, AM: 9 kHz).
• Automatically: Holding down the button for a pro-
longed period of time starts station scanning in the
desired direction until a station with sufficiently strong
transmitting power is found.
Station search (APS, Auto Tuning)
You can program station memory slots automatically.
Confirm to the question “Auto tuning OK?” by briefly
pushing the control dial 3 or the select button 37 “•”.
The device will automatically save the first 30 stations for
USW/FM or 10 stations for MW/AM. Already occupied
memory slots will be deleted in the process.
Erase memory
You can clear station memory slots this way:
Push the select button 37 “•” to erase or the “RETURN”
button 28 to abort.
27
28
37