Operation Manual

• DecoderStation 7 17
Tone/LipSync
With the “TONE/LIPSYNC” button 26, you can adjust the
sound and the audio delay.
Adjusting the sound
Briefly tap the “TONE/LIPSYNC” button 26 to access two
audio control ranges successively: bass (low tones), treble
(high tones)
• Now, adjust the selected range from –10 to +10 with
the arrow buttons 27 “
▲/▼ ”.
• Push the “RETURN” button 28 to finalise the setting.
Setting audio delay
By pushing and holding the “TONE/LIPSYNC” button 26
for more than a second, you can adjust the audio delay
(see the menu function “LIP SYNC” on page 14) for the
active input:
• The current value in milliseconds (ms) is shown in the
display panel and on the screen.
• Set the audio delay within a range from 0 to 200 ms
with the arrow buttons 27 “
▲/▼ ”.
• Push the “RETURN” button 28 to exit the setting.
Direct
In direct mode, the audio signal is emitted without sound
adjustment.
• Tapping the “DIRECT” button 35 displays the current
setting:
Direct OFF – Normal mode with sound adjustment
Direct Mode – Direct mode without sound adjustment
• Tapping the “DIRECT” button 35 again switches the
mode.
Info
Pushing the “INFO” button 36 shows information on the
current audio signal on the screen and in the display pan-
el for approx. three seconds. e.g. “48KHz 2.1 Stereo”.
26
20
27
2836
37
35
Sleep
You want to fall asleep in your comfortable home cin-
ema? This automatic deactivation function will help and
turns off the DecoderStation 7 after a preset time elapses
(max. 60 minutes).
• Briefly tap the “SLEEP” button 20 once to show the
status of the automatic deactivation function:
“Sleep Mode OFF” – Function disabled.
“Sleep Timing xx min” – Deactivation in xx minutes.
• With the arrow buttons 27 “
▲/▼ ”, select the desired
time for deactivation within a range from 15 to 60
minutes.
• Push the “RETURN” button 28 to exit the setting.
The system will deactivate after the preset time has
elapsed.