Operating instructions

• Impaq® 3000 Mk 2 Blu-ray

LIPSYNC

Digital image processing in the television set requires

some time. In order to keep the image and sound

synchronous, television sets delay the sound by a few

milliseconds. For synchronous receiver sound, you can set

the audio delay from 0 to 120 ms.

• The current setting in milliseconds (ms) appears in the

display panel.

• With the navigation buttons 59 “Ï” and 43 “Å”, you

can now set the audio delay from 0 to 120 ms.

SURROUND

Brieﬂ y tipping the navigation buttons 59 “Ï” and 43 “Å”

switches between the available modes:

“5.1 CH” 5.1 channel surround sound

“DPLII” Dolby® ProLogic 2.

“STEREO” Stereo playback.

TONE

With the navigation buttons 42 “▲” and 58 “▼”, sel ect

the desired range of the sound control:

Bass low tones (bass tones)

Treble high tones

With the navigation buttons 59 “Ï” and 43 “Å”, you can

now set the selected range from “–6” (decrease) to “+6”

(increase).

DISTANCE

The surround sound effect may be disrupted if the speak-

ers are positioned at different distances to the listening

position. To compensate for these delays, set the dis-

tances from the listening position to each speaker within

a range from 0 to 400 cm here.

1. Select the desired speaker with the navigation buttons

42 “▲” and 58 “▼”:

C – Center

FL – Front left

FR – Front right

SW – Subwoofer

SL – Rear left

SR – Rear right

2. With the navigation buttons 59 “Ï” and 43 “Å”, set the

distance from the listening position in the range from

“0” to “400” in 20 cm increments.

3. Finish by pushing the button 45 “Return”.