Operating instructions

• Impaq® 3000 Mk 2 Blu-ray
26
Slideshow settings
You can fi nd the menu item “Settings” in the left menu
column of the sub-menu “Images”. Here you can change
the slideshow settings.
• Slideshow effects– different crossfades from image to
image.
• Slideshow delay – from 1 to 30 seconds per image.
Start slideshow
• Select this menu item if you would like to display all
images contained in the folder as a slideshow.
Slideshow with music
For a perfect slideshow, copy the images and a few suit-
able music tracks to a USB stick or a CD.
1. Begin by starting music playback.
2. Then push the button 45 “Return” in order to access the
menu again.
3. Select “Browse pictures” there.
4. Mark the folder containing the desired images and
then select the menu item “Start slideshow”.
You can show or hide the info windows during the slide-
show.
• For the current music track with the button 56 “Audio”
• For the image shown with the button 46 “RDS/Display”
56
45
46
Radio mode
Select one of the radio frequency modes as a source (see
page 13):
FM – Reception of mono and stereo stations from 87.5 to
108 MHz, RDS mode possible.
AM – Reception of mono stations from 531 to 1.602 kHz.
Setting the radio stations
Set the tuning frequency with the buttons 7 “ ” and 6 “
” or 59 “Tune/Ï” and 43 “Tune+/Å”:
• Automatically: After holding down the button (approx.
two seconds), the station scanning in the selected
direction will begin until a station with a strong enough
signal is found.
• Manually: Every time the button is tipped, the frequen-
cy is increased or decreased by one increment (FM:
0.05 MHz, AM: 9 kHz).
The set frequency will appear in the display panel 13. If
617