Setup guide

9
Installation
1. Position the two speakers in your
room and connect them to each other
using the speaker cable provided.
≥ You can choose which of the two
speakers you want to control with the
left stereo signal, and which with the
right, at a later stage.
≥ Please make sure that the colour
coding of the cables match the
connectors on each speaker, as the
wrong polarity will have an adverse
effect on the sound.
≥ Please make sure that there is
room for a sufficient supply of air at
the back of each speaker.
2. Set the voltage switch to the mains
voltage in your area.
≥ Never connect the active speaker
to the power supply if the voltage
switch is set to a setting different to
your local mains voltage.
3. Attach the active speaker to the
power supply and turn on the main
power switch on the back of the
active speaker.
Connecting the Raumfeld Speaker L