Technical Description And User Manual Reflect Dolby® Atmos Ceiling Speakers
Contents General Notes And Information ....3 Notice ............................................ 3 Trademarks ................................... 3 Original packaging ........................ 3 Complaints .................................... 3 Contact .......................................... 3 For Your Safety ..............................5 Proper use ..................................... 5 Explanation of terms ..................... 5 Safety notes ..................................
General Notes And Information Notice Complaints The information in this document may change without prior notice and in no way constitutes any liability on the part of Lautsprecher Teufel GmbH. No part of this user manual may be reproduced in any form or be broadcasted in any way electronically, mechanically, by photocopy or recording without the written permission of Lautsprecher Teufel GmbH. In case of a complaint we will need the following information to process your enquiry: 1.
Before operating the product for the first time, please read the safety notes and user manual carefully. Only in this way, can you ensure that all functions are used in a safe and reliable manner. Store the user manual in a safe place and also be sure to pass it on to any subsequent owner. NOTICE Check that all items have been delivered and that nothing is damaged. If you find any damage, do not operate the device; instead contact our customer service department.
For Your Safety Proper use Safety notes The speakers are designed to supplement the playback of music and speech from an external player with Dolby Atmos support. Only use the speakers as described in this user manual. Any other use will be deemed as not in accordance with the instructions and may lead to damage of property or even persons. The manufacturer accepts no liability for damage caused by improper use. The speakers are intended for domestic use only.
Before you drill, use a metal detector to check the applicable areas. Otherwise, there is a risk of electric shock/short circuit! – Do not place the speakers near heat sources (e.g. heaters, ovens, other heat generating equipment such as amplifiers etc.). An unstable base may cause the unit to tip and injure or even kill persons, children are particularly at risk.
NOTICE Explanation of symbols Improper use may lead to damage or fire. – Do not place open flames such as burning candles or similar on the device. – Do not place the device in direct sunlight. – Only use the device indoors. – Do not operate the device in wet rooms and protect it from dripping and splashing water. Make sure that no vases or other liquid-filled objects are located on or near the device in order to prevent liquid from penetrating the housing.
Overview Unpacking • Carefully open the box, take out the EPE foam half-shell and carefully lift the speakers out of the box. Package contents (1) 2x Reflect ceiling speaker (2) 2x mounting plate (3) 4x screw (1) Checking the package contents • Check that all items have been delivered and that nothing is damaged. • If the delivery is incomplete or the device has been damaged, please contact our service team (see 3). • Do not in any case operate the device if it is damaged.
Dolby Atmos Satellite speakers Conventional Surround Sound systems generate surround sound in a horizontal direction. With Dolby Atmos systems, sound is also projected from above now: Ceiling speakers add even more surround sound. With the Reflect speakers, you can upgrade a 5.1 installation to Dolby Atmos. This would convert the system into a 5.1.2 or 5.1.4 system where the last number generally indicates the number of ceiling speakers. The middle number is the number of the subwoofers.
Preparation Mounting plate You can install the mounting plate (2) in two positions so that can set up the Reflect speaker in an upright position or on its side. • To set up the speakers on existing speakers, the bottom of the mounting plates is fitted with a non-slip rubber layer. • The keyhole openings (5) in the mounting plate are intended for wall mounting. 1. Place the mounting plate in the desired direction on the back of the Reflect speaker. 2.
Setup/Mounting Location tips Wall mounting • Select a stable, level base. In case of wall mounting, follow the instructions in the next chapter. • Make sure that the environment is clean and free from dust. • Select a location away from heat sources and direct sunlight. • Do not place any heavy objects on the cables or the device. Proceed with care when mounting the product on the wall and follow the instructions below.
1. Space the two keyhole openings (5) in the wall where you would like to mount the Reflect speaker. Use a ruler, pencil and spirit level for this. 2. Use a metal detector to check the drill areas. If necessary, select another area for mounting. 3. Use a 5 mm rock drill to drill holes, which are approx. 40 mm deep, at the marked positions. 4. Insert 2 dowels (ø 5 mm) all the way in the drill holes. 5. Screw one screw (4 x 45 mm) into each dowel until there is approx.
Connecting CAUTION Risk of injury/damage! – Lay the cables so that they do not pose a tripping hazard. 1. Lay speaker cables from your AV receiver to each Reflect speaker. If possible, use high-quality dual core speaker cables with a diameter of at least 1 mm2 to do so. 2. On the back of each speaker there is a connection terminal with two pole clamps (7). You can connect the speaker cable directly here or using pin plugs. Direct connection only is described here.
Care And Cleaning NOTICE External influences may damage or destroy the device. – If possible, only use plain water without any additives. In case of stubborn marks, a mild soap solution may be used. – Do not use caustic cleaning products, white spirit, thinners, petrol or similar under any circumstances. Such cleaning agents may damage the delicate surface of the housing. • Ideally, you should remove dust or small amounts of dirt with a dry, smooth leather cloth. • Use a damp cloth to rub off stubborn dirt.
Technical Data Dimensions (WxHxD) without mounting plate 130 x 85.5 x 184 mm Weight 1.45 kg You can find further technical data on our website.
Please contact our customer service department with any questions, suggestions, or complaints: Lautsprecher Teufel GmbH BIKINI Berlin Budapester Straße 44 10787 Berlin (Germany) Phone: 00800 200 300 40 (toll-free) Fax: +49 (0)30 / 300 930 930 Online support: www.teufelaudio.com/service Contact form: www.teufelaudio.com/contact No responsibility is assumed for the correctness of this information. Technical changes, typographical errors and other errors reserved. Manual No.
