User Manual

9
3. Connect the other jack plug of the
connector cable to the 3.5mm jack of
your audio system or smartphone.
4. To disconnect the connector cable
from the headphones, turn the jack
plug counterclockwise to unlock the
jack plug from the connection. Then
gently pull the jack plug away from the
3.5 mm jack.
Notice:
The Bluetooth function will
automatically end once the headphones
are connected via the 3.5 mm jack plug.
Using the remote control
The remote control on the connector
cable features a built-in microphone
and a control button for making
phone calls, using voice assistant and
controlling music playback.
The following functions are available:
Function Operation
Accept incoming
call/end the call
Press the control
button once
Rejecting incoming
call
Press the control
button for
2seconds
Activate voice
assistant (e.g. Siri)
Press and hold
the control
button
Pause or resume
playback
Press the control
button once
Skip to the next track Press the control
button twice
Skip to the previous
track
Press the control
button three
times
The Teufel Headphones App
You can use the Teufel Headphones App
to conveniently control many functions
of your Teufel SUPREME ON head-
phones via smartphone or tablet.
Load the app here:
Teufel Headphones App
in the Apple App Store
Teufel Headphones App
in the Google Play Store
LED indications
During use, the LED 3 does not
illuminate unless there is a change
in operation status. Refer to the table
below for the most frequent LED
indications.
LED Status
Solid green for
1 minute
Battery is fully charged.
Flashing red
quickly
Charging level is low.
Flashing blue
quickly
Ready for Bluetooth
pairing