Technical description and operating instructions T 400 Stereo Floor Speakers with Bi-Wiring/Bi-Amping 91556 GB 20100902.indd 1 02.09.
Contents General notes and information ......................................................................................................................................3 Notice ......................................................................................................................................................... 3 Original packaging........................................................................................................................................ 3 Complaints.......
General notes and information Notice The information in this document may be changed without prior notice and in no way constitutes any liability on the part of Lautsprecher Teufel GmbH. No part of these instructions may be reproduced in any form or be broadcasted in any way electronically, mechanically, by photocopy or recording without the written permission of Lautsprecher Teufel GmbH. © Lautsprecher Teufel GmbH Version 1.
Safety notes Caution icons You will find the following caution icons used in these instructions: Danger High risk! Failure to observe the warning may result in severe personal injury or death. Attention Moderate risk! Failure to observe the warning may result in property damage. Minor risk! Points which should be observed when handling the unit. Safety notes Danger Danger to children! Children can become trapped in the packing film when playing and suffocate.
Unpacking and setup Open the boxes carefully, take out the speakers in their EPE packaging foam parts and carefully take the foam parts off without touching the diaphragms. Connector cable Due to differing customer requirements, the T 400 series is shipped without connector cables. You can find suitable cables in our webshop (www.teufelaudio.com) in the “Accessories” area.
Connecting Connection variations In addition to a standard connection, where every speaker column is connected to the amplifier with a cable, you can also choose the variants “Bi-Wiring” or “Bi-Amping”. Standard connection With this connection, the T 400 speakers are connected like conventional speakers with one 2-core speaker cable each. The contact bridges between the connector terminals may not be removed in the process; you can connect the cables accordingly to the top or bottom terminals.
Care and cleaning The veneered surfaces of our speakers have a protective surface coat, which eliminates the need for wood polish. • You can best remove dust or small amounts of dirt with a dry, smooth leather cloth. • Rub off stubborn dirt with a damp cloth. Make sure that no liquid penetrates the speakers. • Then immediately wipe the surfaces dry using a soft cloth and without applying pressure. Attention Risk of damage! Using the wrong cleaning materials may damage the delicate surface of the case.
For questions, suggestions or criticism please contact our customer service department: Lautsprecher Teufel GmbH Gewerbehof Buelowbogen - Aufgang D1 10783 Berlin (Germany), Buelowstr. 66 Tel.: 00800 200 300 40 Fax: +49 (0)30 - 300 930 930 www.teufelaudio.com No liability is accepted for the accuracy of this information. Technical changes, typographical errors and other errors reserved. Instruction No. 91556_T_01/HC-20100902 91556 GB 20100902.indd 8 02.09.