Operating instructions

11
• Theater® 6 Hybrid
Care and cleaning
Clean the subwoofer and satellite speakers regularly with
a soft, slightly damp microfibre cloth. Please be absolute-
ly sure to observe the following notes in the process:
Danger
Risk of electric shock!
In contact with live parts, water can lead to
electric shock or short circuit.
• Disconnect the mains plug before cleaning.
• Make sure that no liquid penetrates the unit.
Attention
Risk of damage!
Using the wrong cleaning materials may dam-
age the delicate surface of the case.
• If possible, only use plain water without any additives.
In case of stubborn marks, a mild soap solution may
be used.
• In no circumstances should caustic cleaning products,
white spirit, thinners, petrol or similar be used for
cleaning.
Troubleshooting
The following notes and further detailed information on our website should help you to rectify malfunctions. In case
you don’t succeed, please contact our hotline Phone 00800 - 200 300 40 (toll-free). Please also observe the warranty
notes.
Problem Possible cause Solution
The subwoofer isn’t
working.
The subwoofer is off or doesn’t have any
power.
Activate the switches 4 and 8 (“On”). Check the
power cord and socket.
The overload protection has been trig-
gered and the indicator lamp 9 “CLIP” is
illuminated in red.
Let the device cool off and slightly reduce the level
using control 2 “SUB LEVEL”.
Fuse defective. 1.
2.
Disconnect the power
cord.
Carefully pull the fuse
holder out of the mains
connection.
Push the old fuse down
and out. Insert a new
fuse (T 1.6 A, 250 V)
and push the holder
back in.
The volume has been set too low.
Increase the volume using control 2.
The subwoofer hums.
The subwoofer is connected to a different
power circuit from the rest of the system.
Connect the subwoofer and AV receiver to the
same power circuit.
The buzzing is caused by problems with
the power supply.
Purchase a line filter and connect both units to it.
The buzzing is caused by a multiple
socket.
Use another multi-outlet power strip or connect
the subwoofer directly to the wall socket. It may
also help to insert the power plug the other way
around.
Playback is noisy. Generally-speaking, the system is very
low-noise. In the high range area, very
high-resolution speaker systems can ex-
pose the poor quality of a signal source
(e.g. from MP3 files).
Make sure that the source is emitting a clear
signal.
The sound seems flat. Satellites have been connected with the
poles reversed.
Check that the speaker cable on all satellites is
correctly connected.