WARNING - To reduce a risk of fire or electric shock, do not expose the receiver and AC adaptors to rain or moisture.
Dear customer, Congratulations on purchasing a high-quality TEVION® product. You have acquired a modern digital security camera with audio transmission and excellent technical features and respective accessories, which is particularly easy to operate. Please study this information in detail observing, in particular, the safety instructions. The device comes with a 3-year warranty. You will need the enclosed warranty card and your sales receipt in the event of the camera developing a fault.
2. Contents 1 1 2 4 Preface 1. Contents of box 2. Contents 3. Hazard, Safety and Warning notices 7 4. Your video camera 7 8 8 8 9 9 9 10 10 11 4.1. Parts 4.2. Installation of security camera 4.2.1. Fitting stand to camera 4.2.2. Marking for drilling 4.2.3. Fixing to stone/concrete 4.2.4. Fixing to timber 4.2.5. Completing the camera installation 4.3. Connecting the receiver 4.3.1. Connecting the receiver to the playback device 4.3.2. Completing the receiver installation 12 5.
16 16 17 17 18 18 18 18 7. Care 8. Disposal 9. Fault removal (FAQ) 10. Warranty and Service 11. Technical Specification 11.1. Power supply 11.2. Security camera with integrated microphone 11.3. Receiver (2.4G radio AV receiver) 19 12.
3. Hazard, Safety and Warning notices Incorrect use of the camera and accessories can be dangerous for you and others and can damage or destroy the camera. We therefore ask you to read and strictly observe the following hazard, safety and warning notices. Intended use This security camera with audio transmission is solely intended for the audio and image surveillance of interiors.
Hazard of electrocution in case of wet and humid conditions The receiver and any supplied components may not be exposed to dripping or spray water. Containers filled with liquid, such as vases or glasses may also not be placed on or close to the receiver. Danger of fire and electrocution. Do not use receiver and its components close to water and protect against moisture and humidity. Danger of fire and electrocution.
Damage from heat – fire hazard Do not leave camera and receiver in places that are susceptible to considerable increases in temperature (e.g. in a vehicle). The housing and internal parts may be damaged, which in turn could cause a fire. Do not wrap up camera and receiver or place on textiles. This could produce a build-up of heat in the camera that could cause deformation of the housing and may represent a fire hazard.
4. Your video camera 4.1. Parts 1 2 4 3 7 5 6 1. 2. 3. 4. AC adaptors (2x) Security camera Stand 4-channel receiver including base 5. 6. 7. 8.
4.2. Installation of security camera Install the security camera in such a way that no sun light falls onto the lens. The stand can be connected to the underside or rear of the camera, depending on whether the camera is to be wall or ceiling mounted. 4.2.1. Fitting stand to camera (B) Screw the retaining screw (A) of the stand into one of the two threaded holes (B) and secure the stand by tightening the clamping nut (C) against the housing of the security camera.
4.2.3. Fixing to stone/concrete To drill suitable holes for dowels use a ¼" drill bit when installing in masonry or concrete surfaces. After drilling, push dowels into hole until flush with surface. Then secure the stand by using the screws supplied. 4.2.4. Fixing to timber Use a 1/8" masonry drill for pilot drilling respective holes in timber. After drilling the holes, secure the stand using the supplied screws. 4.2.5.
4.3. Connecting the receiver Note: t Caution! In order to prevent any damage, only connect the receiver to the power supply and switch on the playback device (monitor, TV) when all other parts have been connected. 4.3.1. Connecting the receiver to the playback device Using the yellow connector of the supplied AV Cinch cable connect the Video output (H) of the receiver to a suitable video input of your playback device.
4.3.2. Completing the receiver installation Screw an aerial into the aerial socket (l) at the rear of the receiver. The receiver can be operated standing upright on its stand or lying down horizontally. Remove foot (J) when using horizontally. Connect the cable of the power supply to the socket of the receiver (F). Connect the power supply to the mains. Switch on your playback device and select the respective audio/video input to which the security camera is connected.
5. Operation Note: t 5IF USBOTNJTTJPO GSFRVFODJFT PG UIF TFDVSJUZ DBNFSB BOE SFDFJWFS IBWF CFFO GBDUP ry preset. The security camera transmits on the frequency of one of the available four reception channels of the receiver. After switch-on, the transmission channel of the used security camera must be selected on the receiver. The transmission channel of the security camera can be selected at the back of the receiver. 5.1.
If the automatic channel changing function has been activated, the receiver changes reception channels at regular intervals so that alternating images of all connected cameras are shown on screen. Using the TIME SELECT (O) slide switch at the back of the receiver, channel changing intervals can be set. Available intervals are 5, 10, 20 and 30 seconds. (O) 5.3. Infrared light The security camera automatically adjusts to surrounding light conditions.
5.5. Setting the channel on the security camera Note: t 8IFO VTJOH TFWFSBM TFDVSJUZ DBNFSBT FOTVSF UIBU FBDI DBNFSB USBOTNJUT PO B TFQBSBUF channel. As 4 channels are provided, a maximum of 4 security cameras can be connected. Even if only one camera is used, changing the transmission channel may improve reception. t Caution! Always disconnect power supply of camera from mains prior to changing DIBOOFM Remove sealing cap (P) covering the camera’s channel changer.
6. Conformity (FCC-Statement) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user´s authority to operate the equipment.
7. Care The security camera and the receiver do not contain any serviceable components. Clean surfaces using a dry, soft cloth. In case of heavier soiling or for cleaning the lens of the security camera, use a moist soft cloth that has been well wrung out. Finally dry all parts with a soft, lintfree cloth. Do not use any corrosive cleaners, such as ethanol, thinners, etc. Note: t Caution! Always disconnect power supply of camera or of receiver from mains prior to cleaning. 8.
9. Fault removal (FAQ) Fault No transmission Possible cause Remedy Connected to power? Check mains connection. Distance between security came- Reduce distance between ra and recipient too large? security camera and receiver. Bad reception Selected wrong channel? Change channel. Display unit incorrectly set up? Check settings. Two cameras on one channel? Change transmission channel of camera to unassigned channel. Interference on transmission channel? 10.
11. Technical Specification 11.1. Power supply Model: HL-12/2-8E6S Input: 100-240 V ~ 50-60 Hz, 200 mA Output: 12 V 0.5 A Protection class II 11.2. Security camera with integrated microphone Model: SC FR-W304C Input voltage: 12 V DC System: NTSC Transmission frequency 2.4 GHz Infrared LEDs with automatic activation during dusk conditions. Range: infrared light up to 59 ft. Transmission range up to 328 ft. (in free field) Water resitant, IP standard IP65* (for camera unit only) 11.3. Receiver (2.
12.
T Technical Specification TIME SELECT 13 Time setting 13 V Video output 10 W Warning notices 4 Warranty 17 20
supra Foto-Elektronik-Vertriebs-GmbH Denisstr.
