Operation Manual
10
4.3. Connecting the receiver
4.3.1. Connecting the receiver to the playback device
Using the yellow connector of the supplied AV Cinch cable connect the Video output (H) of the
receiver to a suitable video input of your playback device.
Next, using the red connector of the AV Cinch cable, connect the audio output (G) of the recei-
ver to the audio input of your playback device.
Ensure also to observe the notices and information of the Instruction Manual of your playback
device.
Note:
ītī Caution! In order to prevent any damage, only connect the receiver to the power
supply and switch on the playback device (monitor, TV) when all other parts have been
connected.
(F) (G) (H)
(I)