User's Manual

4 SPECIFIC SAFETY RULES FOR USING AXONE 4
The technology used in designing and inspecting the production of AXONE
4 displays units means that they are reliable, simple and safe to use.
Personnel in charge of using diagnostic tools are required to follow the
general safety regulations and use AXONE 4 display units for their
intended use only. Furthermore, they are required to carry out maintenance
as described in this manual.
The following also applies in principle to docking stations built
for use with AXONE 4.
4.1 Glossary
Operator: qualified individual charged with using the display unit.
Display unit: any AXONE 4 device.
4.2 General Rules
•
The operator must have basic knowledge of mechanics, automotive
engineering, car repair and the potential dangers that may arise during self-
diagnosis operations.
•
The operator must carefully read all the information and instructions in the
technical documents provided with the display unit.
4.3 Operator Safety
Airbags inflate with great force; any display unit placed in their
expansion zone could be thrown towards the occupants of the
vehicle causing serious harm.
Safety Measures:
•
Do not place the display unit in the airbag expansion zone.
Some self-diagnosis operations allow you to activate/deactivate
certain actuators and safety systems on the vehicle.
Safety Measures:
•
In order to avoid accidents and/or damage to the device or the electronic
systems of the vehicle connected to the unit, do not allow unqualified
personnel to use the display unit.
•
Follow the instructions supplied by the software closely and carefully.
16