User's Manual

The display unit is built to be waterproof so long as the waterproof
covers of the docking connector and the compartment that houses
the SIM and SD CARD slots are completely closed.
Removing the waterproof covers means that the display unit is no
longer waterproof.
Safety Measures:
•
Do not remove the waterproof covers.
•
Do not wet the display unit when one of the waterproof covers has been
removed.
•
Make the display unit waterproof again by replacing the covers, ensuring
that they are fitted correctly and that there are no foreign bodies between
the covers and the linings on the device.
•
Contact the Technical Assistance service if you are not sure whether the unit
is waterproof.
The electromagnetic compatibility tests carried out on the unit
guarantee that it can be adapted to the technologies normally used
on vehicles (e.g.: engine check, ABS, airbag etc.). Nevertheless,
if malfunctions occur you should contact the vehicle dealer.
4.5 Use in Extreme Environmental Conditions
AXONE 4 display units are designed and built for use in extreme
environmental conditions according to drop standards MIL STD
810F and IP67.
Nevertheless, use in such conditions is considered extraordinary
and not comparable to normal product use. Such use can,
therefore, cause the deterioration of the unit and its working life.
Safety Measures:
•
Do not wet or immerse the display unit intentionally in any kind of liquid.
•
Do not use the display unit when immersed in liquid.
•
Should the unit accidentally get wet or be immersed in liquid, dry and clean
the display unit paying particular attention to the power supply connector.
•
Ensure that the display unit is completely dry before use.
•
Avoid dropping, knocking, shaking or scratching the unit.
•
Do not expose the display unit to outdoor weather conditions.
•
Only use the display unit for the purposes it was designed for and in any
case never in an improper manner.
•
Only press the touchscreen using the stylus pen provided.
20