User's Manual

To reach the FCC ID of the two modules, unscrew the screws from the
lower shell and remove the shell with the speaker and webcam cables.
Move the board with the docking connector to the top.
At the top left you will find the Bluetooth module with the FCC ID printed on
it.
Disconnect the antenna wiring at the left of the docking connector and
remove the module that is connected to it.
On the lower side of this module you will find the corresponding FCC ID.
The minimum separation distance required between the radio module
antenna and the human body should be at least 20 cm to comply with the
RF exposure limits for mobile devices.