User's Manual

10.2 Power supply
The display unit is powered by two internal rechargeable battery packs that
allow it to be used without a mains power supply.
The autonomy supplied by the internal batteries allows you to use the
display unit for the duration of a normal working day.
The internal batteries can be recharged in the following ways:
•
from the mains using the power adaptor supplied,
•
from the mains using the DOCKING STATION CLASSIC,
•
from the vehicle battery using the accessory cable.
•
from the cigar lighter socket using the accessory cable.
In all cases the display unit is powered and can be used normally.
Normally, a complete recharge takes about 3 hours when connected to
the mains without interruption.
Recharge the internal batteries completely when switching on
the display unit for the first time.
Keep the display unit powered using a mains power adaptor or
docking station during software updates.
Only use the power adapter supplied, or an “AC adapter” with
the following specifications: 100-240 Vac, 50/60 Hz, 19 Vdc, 3,7 A.
Always charge the display unit after use.
Move the battery switch to the OFF position if the display unit
is not used for a long period of time.
35
en