User's Manual

10.4 Turning the unit on and off
10.4.1 Turning the unit on
In the following the procedure for turning on the display unit is described.
Proceed as follows:
1.
Hold down the POWER button until the green LED lights up.
2.
Wait for the software to start up and the DESKTOP screen to appear.
The display unit is now ready for use.
Through the DESKTOP, you can activate the specific environment for the
type of vehicle being tested, and access special software functions
available on this display unit.
For further information see the software User Manual.
If the CPU temperature is high, the display unit may not switch
on in order to prevent the CPU and/or the batteries from overheating.
Wait for the display unit to cool down and try again.
If the problem persists contact technical assistance.
40