User's Manual

10.13.2 Connecting to the Display Unit
The following illustrates how to connect the display unit to the docking
station.
To connect the display unit to a docking station you will need to
remove the cover of the DOCKING connector compartment.
Removing the cover of the DOCKING compartment means that
the display unit is no longer completely waterproof.
1.
Fixing screws
2.
MINI DOCKING
3.
Display unit
Proceed as follows:
1.
Remove the screws that fix the DOCKING connector compartment cover
into place.
2.
Remove the compartment cover.
3.
Connect the MINI DOCKING station to the display unit as shown in the
figure.
4.
Fix the MINI DOCKING station using the appropriate screws.
54