User's Manual

The tool was designed so as to be electrically safe and
to work with specific power supply voltage levels.
Failure to comply with the specifications related to the
power supply may impair the tool efficiency.
Safety Measures:
•
Do not wet with water or other liquids.
•
If not otherwise specified, use the tool on vehicles with a 12V DC power
supply and the chassis connected to the negative pole.
•
The connection for the power supply of the tool should always occur
with the battery system of the concerned vehicle.
•
Do not use external batteries to supply the tool unless it is explicitly
required by the software.
•
Pay particular attention to battery terminals and cables when setting up
a connection to the vehicle. This will avoid false contacts and/or avoid
accidentally connecting the cables to metallic parts of the vehicle being
tested.
•
Unused terminals must be covered and protected by the appropriate
rubber plugs.
Electromagnetic compatibility tests on the tool ensure
that it can be adapted to technologies normally used on
vehicles (e.g.: engine check, ABS, airbag etc.).
Nevertheless, if malfunctions occur you need to contact
the retailer.
22