User's Manual
Table Of Contents
- /
- ENGLISH
- RDC Tool TECHNICAL MANUAL
- REVISION OF THE MANUAL
- INTRODUCTION
- 1 LEGEND OF THE SYMBOLS USED
- 2 GENERAL SAFETY REGULATIONS
- 3 SPECIFIC USER SAFETY RULES FOR RDC Tool
- 4 NORMATIVE INFORMATION
- 5 RDC Tool
- 6 DESCRIPTION
- 7 TECHNICAL FEATURES
- 8 CONNECTIVITY
- 9 User Instructions
- 10 MAINTENANCE
- 11 TROUBLESHOOTING
- 12 LEGAL NOTICES
- ENGLISH
9.2.2 Charging from a PC
The device can be charged from a PC using a USB connection.
1.
Device
2.
USB cable
3.
PC
Proceed as follows:
1.
Turn on the PC.
2.
Connect the USB cable to the device.
3.
Connect the USB cable to a USB socket in the PC.
The following icon will appear indicating that the tool is charging:
.
A battery that is completely low takes approximately 5 hours to charge fully.
24