Installation Instructions

9.4 Checking the Installation
Once you have completed all the operations described in the previous chapters, you must make
sure the installation has been carried out correctly.
Proceed as follows:
1.
Connect the TMD MK5 FPT power supply connector and turn the vehicle ignition key to the
“ON” position.
2.
Wait for the red LED on the TMD MK5 FPT to start flashing.
If the LED does not turn on, proceed as follows:
1.
Disconnect the power cable from TMD MK5 FPT.
2.
Wait 5 seconds.
3.
Reconnect the power cable.
24