Installation Instructions

3.4 Device Safety
The device was manufactured to be mechanically resistant.
Careless use and excessive mechanical strain may impair its
efficiency.
Safety Measures:
•
Do not drop, shake or knock the device.
•
Do not place objects over the cables nor bend them.
•
Do not carry out any type of intervention that may damage the device.
•
Do not open or disassemble the device.
•
Do not fold the device's antenna.
•
Use the device only with the antenna it is provided with or with one authorised by the device's
manufacturer.
•
Make sure the device and any accessory connected to it are firmly secured before moving
the vehicle they are installed on.
The device was manufactured to be electrically safe and to work with
specific supply voltage levels.
Failure to comply with the specifications related to the power supply
may impair its efficiency.
Safety Measures:
•
Do not wet the device with water or other liquids.
•
The device's power supply must always be connected following the indications provided in
this manual.
•
Do not use external batteries to power the device.
•
Wear the most suitable personal protective equipment to avoid static electricity.
The device was designed to be used in specific environmental
conditions.
Installing and using the device in environments with temperatures
and humidity that differ from those indicated may impair its efficiency.
Safety Measures:
•
Position the device as indicated in this manual.
•
Do not expose or install the device near sources of heat.
•
Position the device in order to guarantee its proper ventilation.
•
Do not use corrosive chemicals, solvents or harsh detergents to clean the device.
9