User's Manual

EVALUATION BOARD/KIT/MODULE (EVM) ADDITIONAL TERMS

Texas Instruments (TI) provides the enclosed Evaluation Board/Kit/Module (EVM) under the following

conditions:

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user

indemnifies TI from all claims arising from the handling or use of the goods.

Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/ kit may

be returned within 30 days from the date of delivery for a full refund. THE FOREGOING LIMITED

WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL

OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF

THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY

INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

Please read the User's Guide and, specifically, the Warnings and Restrictions notice in the User's Guide

prior to handling the product. This notice contains important safety information about temperatures and

voltages. For additional information on TI's environmental and/or safety programs, please visit

www.ti.com/esh

or contact TI.

No license is granted under any patent right or other intellectual property right of TI covering or relating to

any machine, process, or combination in which such TI products or services might be or are used. TI

currently deals with a variety of customers for products, and therefore our arrangement with the user is not

exclusive. TI assumes no liability for applications assistance, customer product design, software

performance, or infringement of patents or services described herein.

Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265

REGULATORY COMPLIANCE INFORMATION

As noted in the EVM User’s Guide and/or EVM itself, this EVM and/or accompanying hardware may or may

not be subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules.

For EVMs not subject to the above rules, this evaluation board/kit/module is intended for use for

ENGINEERING DEVELOPMENT, DEMONSTRATION OR EVALUATION PURPOSES ONLY and is not

considered by TI to be a finished end product fit for general consumer use. It generates, uses, and can

radiate radio frequency energy and has not been tested for compliance with the limits of computing devices

pursuant to part 15 of FCC or ICES-003 rules, which are designed to provide reasonable protection against

radio frequency interference. Operation of the equipment may cause interference with radio communications,

in which case the user at his own expense will be required to take whatever measures may be required to

correct this interference.

General Statement for EVMs including a radio

User Power/Frequency Use Obligations:

This radio is intended for development/professional use only in

legally allocated frequency and power limits. Any use of radio frequencies and/or power availability of this

EVM and its development application(s) must comply with local laws governing radio spectrum allocation and

power limits for this evaluation module. It is the user’s sole responsibility to only operate this radio in legally

acceptable frequency space and within legally mandated power limitations. Any exceptions to this is strictly

prohibited and unauthorized by Texas Instruments unless user has obtained appropriate

experimental/development licenses from local regulatory authorities, which is responsibility of user including

its acceptable authorization.