User's Manual

16/21

Texas Instruments (TI) provides the enclosed Evaluation Board/Kit/Module (EVM) under the following

conditions:

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the

user indemnifies TI from all claims arising from the handling or use of the goods.

Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/

kit may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING

LIMITED WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN

LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY

WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT

TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE

TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

Please read the User's Guide and, specifically, the Warnings and Restrictions notice in the User's

Guide prior to handling the product. This notice contains important safety information about

temperatures and voltages. For additional information on TI's environmental and/or safety programs,

please visit www.ti.com/esh or contact TI.

No license is granted under any patent right or other intellectual property right of TI covering or

relating to any machine, process, or combination in which such TI products or services might be or

are used. TI currently deals with a variety of customers for products, and therefore our arrangement

with the user is not exclusive. TI assumes no liability for applications assistance, customer product

design, software performance, or infringement of patents or services described herein.

Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265

REGULATORY COMPLIANCE INFORMATION

As noted in the EVM User’s Guide and/or EVM itself, this EVM and/or accompanying hardware may

or may not be subject to the Federal Communications Commission (FCC) and Industry Canada (IC)

rules.

For EVMs not subject to the above rules, this evaluation board/kit/module is intended for use for

ENGINEERING DEVELOPMENT, DEMONSTRATION OR EVALUATION PURPOSES ONLY and is

not considered by TI to be a finished end product fit for general consumer use. It generates, uses, and

can radiate radio frequency energy and has not been tested for compliance with the limits of

computing devices pursuant to part 15 of FCC or ICES-003 rules, which are designed to provide

reasonable protection against radio frequency interference. Operation of the equipment may cause

interference with radio communications, in which case the user at his own expense will be required to

take whatever measures may be required to correct this interference.

General Statement for EVMs including a radio

User Power/Frequency Use Obligations: This radio is intended for development/professional use only

in legally allocated frequency and power limits. Any use of radio frequencies and/or power availability

of this EVM and its development application(s) must comply with local laws governing radio spectrum

allocation and power limits for this evaluation module. It is the user’s sole responsibility to only

operate this radio in legally acceptable frequency space and within legally mandated power

limitations. Any exceptions to this is strictly prohibited and unauthorized by Texas Instruments unless

user has obtained appropriate experimental/development licenses from local regulatory authorities,

which is responsibility of user including its acceptable authorization.