User's Manual

EVALUATION BOARD/KIT/MODULE (EVM) ADDITIONAL TERMS

Texas Instruments (TI) provides the enclosed Evaluation Board/Kit/Module (EVM) under the following

conditions:

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user

indemnifies TI from all claims arising from the handling or use of the goods.

Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/ kit may be

returned within 30 days from the date of delivery for a full refund. THE FOREGOING LIMITED WARRANTY IS

THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THE

INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY

INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

Please read the User's Guide and, specifically, the Warnings and Restrictions notice in the User's Guide prior to

handling the product. This notice contains important safety information about temperatures and voltages. For

additional information on TI's environmental and/or safety programs, please visit

www.ti.com/esh or contact TI.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any

machine, process, or combination in which such TI products or services might be or are used. TI currently deals

with a variety of customers for products, and therefore our arrangement with the user is not exclusive. TI

assumes no liability for applications assistance, customer product design, software performance, or

infringement of patents or services described herein.

Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265

REGULATORY COMPLIANCE INFORMATION

As noted in the EVM User’s Guide and/or EVM itself, this EVM and/or accompanying hardware may or may not

be subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules.

For EVMs not subject to the above rules, this evaluation board/kit/module is intended for use for

ENGINEERING DEVELOPMENT, DEMONSTRATION OR EVALUATION PURPOSES ONLY and is not

considered by TI to be a finished end product fit for general consumer use. It generates, uses, and can radiate

radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to

part 15 of FCC or ICES-003 rules, which are designed to provide reasonable protection against radio frequency

interference. Operation of the equipment may cause interference with radio communications, in which case the

user at his own expense will be required to take whatever measures may be required to correct this interference.

General Statement for EVMs including a radio

User Power/Frequency Use Obligations:

This radio is intended for development/professional use only in legally

allocated frequency and power limits. Any use of radio frequencies and/or power availability of this EVM and its

development application(s) must comply with local laws governing radio spectrum allocation and power limits for

this evaluation module. It is the user’s sole responsibility to only operate this radio in legally acceptable

frequency space and within legally mandated power limitations. Any exceptions to this is strictly prohibited and

unauthorized by Texas Instruments unless user has obtained appropriate experimental/development licenses

from local regulatory authorities, which is responsibility of user including its acceptable authorization.