User manual

AIR BoosterPack Quick Start Guide
The Anaren Integrated Radio (AIR) BoosterPack is designed to provide instant
wireless connectivity to the TI LaunchPad Development Tool. Just follow the simple
instructions below and you’ll be ‘on the AIR’ in minutes.
BoosterStack Lite
Supporting the AIR BoosterPack for LaunchPad
CD Contents
Software
Firmware
User’s Guide
Web Resources
www.anaren.com/air-boosterpack
© 2011 Anaren Inc.
Soldering Iron
Solder
IC Puller
X-jumper
USB Battery
This kit contains: You may also need/want:
BoosterPack Firmware
ICs
Software
CD
Computer Tools/
Supplies
LaunchPad
(2)
Layout & Function: See Users Manual for full description of all features
A Pads for optional SWITCH
B AIR Radio Module
C Range Test optimal orientation
indicator (see Users Manual)
D Pads for optional LED
E Data path jumper settings
(preset defaults)
F “Prototype area.” Use these pads
to build your project onboard
G Pads for MCU expansion
Installation & Launch: Follow these directions for quick setup
1. Insert the CD provided in the Anaren BoosterPack kit,
and if prompted click the “Install AIR Booster Stack
Lite” icon. If a menu of options does not automatically
appear, click “autorun.exe” in the CD root menu.
2. If using on a computer where the LaunchPad drivers
have not been previously installed, click the “Install
LaunchPad USB Driver” menu option. The drivers are
automatically installed.
3. Once the drivers are installed, follow the instructions in
LaunchPad kit to verify hardware operation by running
the ‘temperature measurement’ application.
4. Disconnect the Launchpad from the computer, and if
required, solder the two 10-pin male headers to each
LaunchPad.
<15.00
Continue on to get your BoosterPack running …
A
B
C
D E F G