User's Manual

Terminal Technician Making Initial E.S.P. Unit Readings
BIB TRACK ESP Unit User Guide3.doc 09/02/02 Page 11 of 70
Inspecting and Mounting Tires with E.S.P. Unit
Use this procedure to inspect and/or mount tires on vehicles whose Fleet Vehicle ID
and Vehicle Sensor ID have been matched.
1. Access the E.S.P. Unit's Main Menu. If needed, press the CLR key until it appears.
MAIN MENU
1: Action Menu
2: Send/Rec Data
3: Erase Data
4: Version
5: Read Sensor
Main Menu
2. Use the arrow keys to select the Action Menu and press Enter.
ACTION MENU
1: Add New Tires
2: Inspect & Mount
3: Dismount Tire
4: Repair Menu
5: Retread Menu
6: Dispose Tire
7: Ship/Receive
8: In Inventory
9: Match Vehicle
0: Change Fleet
Action Menu
3. On the Action Menu, use the arrow keys to highlight Inspect & Mount then press
Enter to call up the Tire Inspect/Mount screen.
TIRE INSPECT/MOUNT
SCAN VEH:
Press Any Key to
Scan
Tire Inspect/Mount Screen
4. Place the E.S.P. Unit scanning wand near the Vehicle ID Sensor and press any
key.